CVE-2026-31494

HIGHCVSS 7.8/10EPSS 0.13%

Last modified

CVE-2026-31494 is a high-severity vulnerability rated 7.8/10 on the CVSS scale. In the Linux kernel, the following vulnerability has been resolved: net: macb: use the current queue number for stats There's a potential mismatch between the memory reserved for statistics and the amount of memory written. gem_get_sset_count() correctly computes the number of stats based on the active queues, whereas gem_get_ethtool_stats() indiscriminately copies data using the maximum number of queues, and in the case the number of active queues is less than MACB_MAX_QUEUES, this results in a OOB write as observed in the KASAN splat. ================================================================== BUG: KASAN: vmalloc-out-of-bounds in gem_get_ethtool_stats+0x54/0x78 [macb] Write of size 760 at addr ffff80008080b000 by task ethtool/1027 CPU: [...] Tainted: [E]=UNSIGNED_MODULE Hardware name: raspberrypi rpi/rpi, BIOS 2025.10 10/01/2025 Call trace: show_stack+0x20/0x38 (C) dump_stack_lvl+0x80/0xf8 print_report+0x384/0x5e0 kasan_report+0xa0/0xf0 kasan_check_range+0xe8/0x190 __asan_memcpy+0x54/0x98 gem_get_ethtool_stats+0x54/0x78 [macb 926c13f3af83b0c6fe64badb21ec87d5e93fcf65] dev_ethtool+0x1220/0x38c0 dev_ioctl+0x4ac/0xca8 sock_do_ioctl+0x170/0x1d8 sock_ioctl+0x484/0x5d8 __arm64_sys_ioctl+0x12c/0x1b8 invoke_syscall+0xd4/0x258 el0_svc_common.constprop.0+0xb4/0x240 do_el0_svc+0x48/0x68 el0_svc+0x40/0xf8 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1b0/0x1b8 The buggy address belongs to a 1-page vmalloc region starting at 0xffff80008080b000 allocated at dev_ethtool+0x11f0/0x38c0 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff00000a333000 pfn:0xa333 flags: 0x7fffc000000000(node=0|zone=0|lastcpupid=0x1ffff) raw: 007fffc000000000 0000000000000000 dead000000000122 0000000000000000 raw: ffff00000a333000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff80008080b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff80008080b100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff80008080b180: 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffff80008080b200: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffff80008080b280: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ================================================================== Fix it by making sure the copied size only considers the active number of queues.. EPSS estimates a 0.13% chance of exploitation in the next 30 days.

Description

In the Linux kernel, the following vulnerability has been resolved: net: macb: use the current queue number for stats There's a potential mismatch between the memory reserved for statistics and the amount of memory written. gem_get_sset_count() correctly computes the number of stats based on the active queues, whereas gem_get_ethtool_stats() indiscriminately copies data using the maximum number of queues, and in the case the number of active queues is less than MACB_MAX_QUEUES, this results in a OOB write as observed in the KASAN splat. ================================================================== BUG: KASAN: vmalloc-out-of-bounds in gem_get_ethtool_stats+0x54/0x78 [macb] Write of size 760 at addr ffff80008080b000 by task ethtool/1027 CPU: [...] Tainted: [E]=UNSIGNED_MODULE Hardware name: raspberrypi rpi/rpi, BIOS 2025.10 10/01/2025 Call trace: show_stack+0x20/0x38 (C) dump_stack_lvl+0x80/0xf8 print_report+0x384/0x5e0 kasan_report+0xa0/0xf0 kasan_check_range+0xe8/0x190 __asan_memcpy+0x54/0x98 gem_get_ethtool_stats+0x54/0x78 [macb 926c13f3af83b0c6fe64badb21ec87d5e93fcf65] dev_ethtool+0x1220/0x38c0 dev_ioctl+0x4ac/0xca8 sock_do_ioctl+0x170/0x1d8 sock_ioctl+0x484/0x5d8 __arm64_sys_ioctl+0x12c/0x1b8 invoke_syscall+0xd4/0x258 el0_svc_common.constprop.0+0xb4/0x240 do_el0_svc+0x48/0x68 el0_svc+0x40/0xf8 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1b0/0x1b8 The buggy address belongs to a 1-page vmalloc region starting at 0xffff80008080b000 allocated at dev_ethtool+0x11f0/0x38c0 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff00000a333000 pfn:0xa333 flags: 0x7fffc000000000(node=0|zone=0|lastcpupid=0x1ffff) raw: 007fffc000000000 0000000000000000 dead000000000122 0000000000000000 raw: ffff00000a333000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff80008080b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff80008080b100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff80008080b180: 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffff80008080b200: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffff80008080b280: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ================================================================== Fix it by making sure the copied size only considers the active number of queues.

Metrics

CVSS 3.1
7.8/10

CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

EPSS Probability
0.13%

2.9th percentile

Probability of exploitation in the next 30 days. Learn more

Weakness Enumeration

Affected Software

VendorProductVersionsUpdate
LinuxLinux Kernel>= 4.16.1, < 5.10.253
LinuxLinux Kernel>= 5.11, < 5.15.203
LinuxLinux Kernel>= 5.16, < 6.1.168
LinuxLinux Kernel>= 6.2, < 6.6.131
LinuxLinux Kernel>= 6.7, < 6.12.80
LinuxLinux Kernel>= 6.13, < 6.18.21
LinuxLinux Kernel>= 6.19, < 6.19.11
LinuxLinux Kernel4.16
LinuxLinux Kernel7.0Rc1

References

Timeline

Published
Last Modified
Status
Analyzed

Frequently Asked Questions

What is CVE-2026-31494?
In the Linux kernel, the following vulnerability has been resolved: net: macb: use the current queue number for stats There's a potential mismatch between the memory reserved for statistics and the amount of memory written. gem_get_sset_count() correctly computes the number of stats based on the active queues, whereas gem_get_ethtool_stats() indiscriminately copies data using the maximum number of queues, and in the case the number of active queues is less than MACB_MAX_QUEUES, this results in a OOB write as observed in the KASAN splat. ================================================================== BUG: KASAN: vmalloc-out-of-bounds in gem_get_ethtool_stats+0x54/0x78 [macb] Write of size 760 at addr ffff80008080b000 by task ethtool/1027 CPU: [...] Tainted: [E]=UNSIGNED_MODULE Hardware name: raspberrypi rpi/rpi, BIOS 2025.10 10/01/2025 Call trace: show_stack+0x20/0x38 (C) dump_stack_lvl+0x80/0xf8 print_report+0x384/0x5e0 kasan_report+0xa0/0xf0 kasan_check_range+0xe8/0x190 __asan_memcpy+0x54/0x98 gem_get_ethtool_stats+0x54/0x78 [macb 926c13f3af83b0c6fe64badb21ec87d5e93fcf65] dev_ethtool+0x1220/0x38c0 dev_ioctl+0x4ac/0xca8 sock_do_ioctl+0x170/0x1d8 sock_ioctl+0x484/0x5d8 __arm64_sys_ioctl+0x12c/0x1b8 invoke_syscall+0xd4/0x258 el0_svc_common.constprop.0+0xb4/0x240 do_el0_svc+0x48/0x68 el0_svc+0x40/0xf8 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1b0/0x1b8 The buggy address belongs to a 1-page vmalloc region starting at 0xffff80008080b000 allocated at dev_ethtool+0x11f0/0x38c0 The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff00000a333000 pfn:0xa333 flags: 0x7fffc000000000(node=0|zone=0|lastcpupid=0x1ffff) raw: 007fffc000000000 0000000000000000 dead000000000122 0000000000000000 raw: ffff00000a333000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff80008080b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff80008080b100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff80008080b180: 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffff80008080b200: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffff80008080b280: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ================================================================== Fix it by making sure the copied size only considers the active number of queues.
How severe is CVE-2026-31494?
CVE-2026-31494 has a CVSS score of 7.8/10 (HIGH severity). The EPSS model estimates a 0.13% probability of exploitation in the next 30 days.
How do I fix CVE-2026-31494?
Check the vendor references and advisories linked above for patched versions and mitigation guidance. You can also run a Strix scan to test if your systems are affected.

Are you affected by CVE-2026-31494?

Run a free Strix scan to check your systems for this vulnerability.

Scan your code now

Source: NVD / NIST