CVE-2026-31754

MEDIUMCVSS 5.5/10EPSS 0.12%

Last modified

CVE-2026-31754 is a medium-severity vulnerability rated 5.5/10 on the CVSS scale. In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: gadget: fix state inconsistency on gadget init failure When cdns3_gadget_start() fails, the DRD hardware is left in gadget mode while software state remains INACTIVE, creating hardware/software state inconsistency. When switching to host mode via sysfs: echo host > /sys/class/usb_role/13180000.usb-role-switch/role The role state is not set to CDNS_ROLE_STATE_ACTIVE due to the error, so cdns_role_stop() skips cleanup because state is still INACTIVE. This violates the DRD controller design specification (Figure22), which requires returning to idle state before switching roles. This leads to a synchronous external abort in xhci_gen_setup() when setting up the host controller: [ 516.440698] configfs-gadget 13180000.usb: failed to start g1: -19 [ 516.442035] cdns-usb3 13180000.usb: Failed to add gadget [ 516.443278] cdns-usb3 13180000.usb: set role 2 has failed ... [ 1301.375722] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1301.377716] Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP [ 1301.382485] pc : xhci_gen_setup+0xa4/0x408 [ 1301.393391] backtrace: ... xhci_gen_setup+0xa4/0x408 <-- CRASH xhci_plat_setup+0x44/0x58 usb_add_hcd+0x284/0x678 ... cdns_role_set+0x9c/0xbc <-- Role switch Fix by calling cdns_drd_gadget_off() in the error path to properly clean up the DRD gadget state.. EPSS estimates a 0.12% chance of exploitation in the next 30 days.

Description

In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: gadget: fix state inconsistency on gadget init failure When cdns3_gadget_start() fails, the DRD hardware is left in gadget mode while software state remains INACTIVE, creating hardware/software state inconsistency. When switching to host mode via sysfs: echo host > /sys/class/usb_role/13180000.usb-role-switch/role The role state is not set to CDNS_ROLE_STATE_ACTIVE due to the error, so cdns_role_stop() skips cleanup because state is still INACTIVE. This violates the DRD controller design specification (Figure22), which requires returning to idle state before switching roles. This leads to a synchronous external abort in xhci_gen_setup() when setting up the host controller: [ 516.440698] configfs-gadget 13180000.usb: failed to start g1: -19 [ 516.442035] cdns-usb3 13180000.usb: Failed to add gadget [ 516.443278] cdns-usb3 13180000.usb: set role 2 has failed ... [ 1301.375722] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1301.377716] Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP [ 1301.382485] pc : xhci_gen_setup+0xa4/0x408 [ 1301.393391] backtrace: ... xhci_gen_setup+0xa4/0x408 <-- CRASH xhci_plat_setup+0x44/0x58 usb_add_hcd+0x284/0x678 ... cdns_role_set+0x9c/0xbc <-- Role switch Fix by calling cdns_drd_gadget_off() in the error path to properly clean up the DRD gadget state.

Metrics

CVSS 3.1
5.5/10

CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

EPSS Probability
0.12%

2.4th percentile

Probability of exploitation in the next 30 days. Learn more

Affected Software

VendorProductVersionsUpdate
LinuxLinux Kernel>= 5.4, < 5.15.203
LinuxLinux Kernel>= 5.16, < 6.1.168
LinuxLinux Kernel>= 6.2, < 6.6.134
LinuxLinux Kernel>= 6.7, < 6.12.81
LinuxLinux Kernel>= 6.13, < 6.18.22
LinuxLinux Kernel>= 6.19, < 6.19.12
LinuxLinux Kernel7.0Rc1

References

Timeline

Published
Last Modified
Status
Analyzed

Frequently Asked Questions

What is CVE-2026-31754?
In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: gadget: fix state inconsistency on gadget init failure When cdns3_gadget_start() fails, the DRD hardware is left in gadget mode while software state remains INACTIVE, creating hardware/software state inconsistency. When switching to host mode via sysfs: echo host > /sys/class/usb_role/13180000.usb-role-switch/role The role state is not set to CDNS_ROLE_STATE_ACTIVE due to the error, so cdns_role_stop() skips cleanup because state is still INACTIVE. This violates the DRD controller design specification (Figure22), which requires returning to idle state before switching roles. This leads to a synchronous external abort in xhci_gen_setup() when setting up the host controller: [ 516.440698] configfs-gadget 13180000.usb: failed to start g1: -19 [ 516.442035] cdns-usb3 13180000.usb: Failed to add gadget [ 516.443278] cdns-usb3 13180000.usb: set role 2 has failed ... [ 1301.375722] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1301.377716] Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP [ 1301.382485] pc : xhci_gen_setup+0xa4/0x408 [ 1301.393391] backtrace: ... xhci_gen_setup+0xa4/0x408 <-- CRASH xhci_plat_setup+0x44/0x58 usb_add_hcd+0x284/0x678 ... cdns_role_set+0x9c/0xbc <-- Role switch Fix by calling cdns_drd_gadget_off() in the error path to properly clean up the DRD gadget state.
How severe is CVE-2026-31754?
CVE-2026-31754 has a CVSS score of 5.5/10 (MEDIUM severity). The EPSS model estimates a 0.12% probability of exploitation in the next 30 days.
How do I fix CVE-2026-31754?
Check the vendor references and advisories linked above for patched versions and mitigation guidance. You can also run a Strix scan to test if your systems are affected.

Are you affected by CVE-2026-31754?

Run a free Strix scan to check your systems for this vulnerability.

Scan your code now

Source: NVD / NIST