CVE-2026-82961: zephyr Out-of-Bounds Write (CVSS 7.8)

Description

The GPIO syscall handlers in drivers/gpio/gpio_handlers.c did not validate the pin argument supplied by a user-mode caller. z_vrfy_gpio_pin_configure(), z_vrfy_gpio_pin_get_config() and z_vrfy_gpio_pin_interrupt_configure() verified only the device object (K_SYSCALL_DRIVER_GPIO() / K_SYSCALL_OBJ()) and then passed the caller-supplied gpio_pin_t straight through to z_impl_gpio_pin_*() and on to the driver. The only pin check in include/zephyr/drivers/gpio.h was __ASSERT(gpio_port_pin_is_supported(cfg->port_pin_mask, pin), ...), which compiles to nothing unless CONFIG_ASSERT is enabled, so in a production build no check existed at all. GPIO drivers use pin as a shift count and as an array index on the documented assumption that it is a pin the controller supports. On STM32, for example, gpio_stm32_pin_interrupt_configure() turns pin into an EXTI line and stm32_gpio_intc_set_irq_callback() writes data->cb[line_num].cb and data->cb[line_num].data into a NUM_EXTI_LINES-entry array (default 16) in drivers/interrupt_controller/intc_gpio_stm32.c, guarded only by a compiled-out __ASSERT_NO_MSG(); the same function then reads exti_irq_table[line_num] and calls irq_enable() on the result. Other controllers index fixed-size per-pin configuration tables the same way — drivers/gpio/gpio_ite_it8xxx2_v2.c reads an MMIO base pointer out of wuc_base[8] with the caller's pin and performs a read-modify-write through it. The issue is reachable only in builds with CONFIG_USERSPACE=y (the file is compiled under that symbol), by a user-mode thread that has been granted access to a GPIO device object. Such a grant is intended to authorize control of that port's pins; the missing validation instead lets the thread drive a supervisor-mode out-of-bounds write of a function pointer and an associated void * past a kernel .bss array, and out-of-bounds reads that feed irq_enable() and MMIO accesses — an escape from the user-mode sandbox that can lead to kernel memory corruption, arbitrary code execution, or a crash. The fix validates pin against the controller's gpio_driver_config.port_pin_mask with gpio_port_pin_is_supported() in every pin-taking z_vrfy_ handler and returns -EINVAL otherwise, complemented by an unconditional pin >= GPIO_MAX_PINS_PER_PORT range check added to the shared z_impl_gpio_pin_*() inlines.

Metrics

CVSS 3.1

7.8/10

CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Weakness Enumeration

CWE-787

Affected Software

Source: CNA advisory (CVE.org). NVD analysis pending.

Vendor	Product	Versions
zephyrproject	zephyr	>= 2.2.0, <= 4.4.2

References

Timeline

Published: Oct 28, 2026
Last Modified: Oct 28, 2026
Status: Awaiting Analysis

Frequently Asked Questions

What is CVE-2026-82961?

The GPIO syscall handlers in drivers/gpio/gpio_handlers.c did not validate the pin argument supplied by a user-mode caller. z_vrfy_gpio_pin_configure(), z_vrfy_gpio_pin_get_config() and z_vrfy_gpio_pin_interrupt_configure() verified only the device object (K_SYSCALL_DRIVER_GPIO() / K_SYSCALL_OBJ()) and then passed the caller-supplied gpio_pin_t straight through to z_impl_gpio_pin_*() and on to the driver. The only pin check in include/zephyr/drivers/gpio.h was __ASSERT(gpio_port_pin_is_supported(cfg->port_pin_mask, pin), ...), which compiles to nothing unless CONFIG_ASSERT is enabled, so in a production build no check existed at all. GPIO drivers use pin as a shift count and as an array index on the documented assumption that it is a pin the controller supports. On STM32, for example, gpio_stm32_pin_interrupt_configure() turns pin into an EXTI line and stm32_gpio_intc_set_irq_callback() writes data->cb[line_num].cb and data->cb[line_num].data into a NUM_EXTI_LINES-entry array (default 16) in drivers/interrupt_controller/intc_gpio_stm32.c, guarded only by a compiled-out __ASSERT_NO_MSG(); the same function then reads exti_irq_table[line_num] and calls irq_enable() on the result. Other controllers index fixed-size per-pin configuration tables the same way — drivers/gpio/gpio_ite_it8xxx2_v2.c reads an MMIO base pointer out of wuc_base[8] with the caller's pin and performs a read-modify-write through it. The issue is reachable only in builds with CONFIG_USERSPACE=y (the file is compiled under that symbol), by a user-mode thread that has been granted access to a GPIO device object. Such a grant is intended to authorize control of that port's pins; the missing validation instead lets the thread drive a supervisor-mode out-of-bounds write of a function pointer and an associated void * past a kernel .bss array, and out-of-bounds reads that feed irq_enable() and MMIO accesses — an escape from the user-mode sandbox that can lead to kernel memory corruption, arbitrary code execution, or a crash. The fix validates pin against the controller's gpio_driver_config.port_pin_mask with gpio_port_pin_is_supported() in every pin-taking z_vrfy_ handler and returns -EINVAL otherwise, complemented by an unconditional pin >= GPIO_MAX_PINS_PER_PORT range check added to the shared z_impl_gpio_pin_*() inlines.

How severe is CVE-2026-82961?

CVE-2026-82961 has a CVSS score of 7.8/10 (HIGH severity).

How do I fix CVE-2026-82961?

Check the vendor references and advisories linked above for patched versions and mitigation guidance. You can also run a Strix scan to test if your systems are affected.

How Strix Helps

Related CVEs from 2026

View all 2026CVEs →