CVE-2026-98313: Linux Vulnerability

Description

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: skip PUSH_IDLE when the link was never enabled msm_dp_display_atomic_enable() returns early when link training fails, leaving ->power_on false and the main link down. msm_dp_display_atomic_disable() nevertheless writes DP_STATE_CTRL_PUSH_IDLE and waits for an idle-pattern completion that cannot arrive, so every failed enable is followed by "PUSH_IDLE pattern timedout". Every other step of the teardown is already gated on that flag: msm_dp_display_disable(), called from .atomic_post_disable(), returns early on !power_on. The PUSH_IDLE write is the only one that is not, so the controller's runtime-PM reference is then dropped without the link having been taken down. On glymur (Snapdragon X2 Elite) the consequence is not a warning. The SoC does not survive it: TrustZone force-stops the SOCCP and ADSP remote processors and the machine resets silently about 50 ms later, with no oops and no panic. On an ASUS Zenbook A16 (UX3607OA), whose eDP panel does not currently train, this reproduces without any compositor or GPU involvement: # eDP enable has already failed with "Failed link training (rc=-104)" echo 1 > /sys/class/graphics/fb0/blank [535.645455] === marker === [535.694833] qcom_q6v5_pas d00000.remoteproc: fatal error received: \ sys_m_smsm.c:512:TZ force stop [535.694875] remoteproc remoteproc0: crash detected in soccp: type fatal error [535.728857] qcom_q6v5_pas 6800000.remoteproc: fatal error received: \ sys_m_smsm.c:783:err fatal notification received from TZ <SoC reset> Gate the PUSH_IDLE write on ->power_on so the disable path is consistent with the rest of the teardown. With this applied the same sequence is harmless and the machine stays up; without it, it resets every time. The unconditional write dates back to the original DP driver (c943b4948b58 ("drm/msm/dp: add displayPort driver support")), but the surrounding code has been restructured several times since, so no Fixes: tag is offered. Note that the eDP link-training failure that exposes this on the A16 is a separate problem in the glymur eDP PHY and is reported separately; this change is about not damaging the machine when training fails, for whatever reason. Tested on ASUS Zenbook A16 (UX3607OA), Snapdragon X2 Elite Extreme, on linux-next next-20260803 and next-20260807. The machine has since been running next-20260807 with this patch as its daily driver. Patchwork: https://patchwork.freedesktop.org/patch/745167/

Affected Software

Source: CNA advisory (CVE.org). NVD analysis pending.

Vendor	Product	Versions
Linux	Linux	>= 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2, < dc57147549a10c99766144cde265645287718ff7; >= 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2, < 5e97d117b79c3ce89542369ef697be64850de8ad; >= 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2, < e249a6e2a130c08bb4d8b0a55cbe29754307e5c9; < 6.18.54; < 7.2.8
Linux	Linux	All versions

References

Timeline

Published: Oct 6, 2026
Last Modified: Oct 6, 2026
Status: Received

Frequently Asked Questions

What is CVE-2026-98313?

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: skip PUSH_IDLE when the link was never enabled msm_dp_display_atomic_enable() returns early when link training fails, leaving ->power_on false and the main link down. msm_dp_display_atomic_disable() nevertheless writes DP_STATE_CTRL_PUSH_IDLE and waits for an idle-pattern completion that cannot arrive, so every failed enable is followed by "PUSH_IDLE pattern timedout". Every other step of the teardown is already gated on that flag: msm_dp_display_disable(), called from .atomic_post_disable(), returns early on !power_on. The PUSH_IDLE write is the only one that is not, so the controller's runtime-PM reference is then dropped without the link having been taken down. On glymur (Snapdragon X2 Elite) the consequence is not a warning. The SoC does not survive it: TrustZone force-stops the SOCCP and ADSP remote processors and the machine resets silently about 50 ms later, with no oops and no panic. On an ASUS Zenbook A16 (UX3607OA), whose eDP panel does not currently train, this reproduces without any compositor or GPU involvement: # eDP enable has already failed with "Failed link training (rc=-104)" echo 1 > /sys/class/graphics/fb0/blank [535.645455] === marker === [535.694833] qcom_q6v5_pas d00000.remoteproc: fatal error received: \ sys_m_smsm.c:512:TZ force stop [535.694875] remoteproc remoteproc0: crash detected in soccp: type fatal error [535.728857] qcom_q6v5_pas 6800000.remoteproc: fatal error received: \ sys_m_smsm.c:783:err fatal notification received from TZ <SoC reset> Gate the PUSH_IDLE write on ->power_on so the disable path is consistent with the rest of the teardown. With this applied the same sequence is harmless and the machine stays up; without it, it resets every time. The unconditional write dates back to the original DP driver (c943b4948b58 ("drm/msm/dp: add displayPort driver support")), but the surrounding code has been restructured several times since, so no Fixes: tag is offered. Note that the eDP link-training failure that exposes this on the A16 is a separate problem in the glymur eDP PHY and is reported separately; this change is about not damaging the machine when training fails, for whatever reason. Tested on ASUS Zenbook A16 (UX3607OA), Snapdragon X2 Elite Extreme, on linux-next next-20260803 and next-20260807. The machine has since been running next-20260807 with this patch as its daily driver. Patchwork: https://patchwork.freedesktop.org/patch/745167/

How severe is CVE-2026-98313?

Severity scoring for CVE-2026-98313 is pending analysis.

How do I fix CVE-2026-98313?

Check the vendor references and advisories linked above for patched versions and mitigation guidance. You can also run a Strix scan to test if your systems are affected.

How Strix Helps

Related CVEs from 2026

View all 2026CVEs →