CVE-2026-18413: zephyr Out-of-Bounds Write (CVSS 7.8)

Description

The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to be not large enough". The NXP MCUX LPADC driver did not honour that contract. mcux_lpadc_start_read() in drivers/adc/adc_mcux_lpadc.c performed no buffer-size check at all before assigning data->buffer = sequence->buffer. Each completed conversion then stores one 16-bit sample per enabled channel per sampling round through an unbounded *data->buffer++: in mcux_lpadc_isr() for interrupt-driven builds, and in mcux_lpadc_dma_callback() for DMA-driven builds on releases that have the DMA path. A sequence selecting two channels with a two-byte buffer, for example, has its second sample written past the end of the buffer. On a build with CONFIG_USERSPACE, adc_read() and adc_read_async() are system calls. The handler in drivers/adc/adc_handlers.c copies the sequence in from user memory, verifies only that [buffer, buffer + buffer_size) is writable by the calling thread, and rejects a user-supplied options->callback; it deliberately leaves the size arithmetic to the driver. A user-mode thread that has been granted access to an LPADC device object therefore fully controls channels, buffer, buffer_size and options->extra_samplings, and can request far more samples than its buffer can hold: up to channels * 65536 samples into a two-byte buffer, since the sample pointer is only rewound on a repeat sampling, never on the extra samplings of a sequence. The resulting stores are performed by the driver in kernel mode (in the ADC interrupt handler or the DMA completion callback), where the MPU does not restrict the thread's memory domain, so the write walks linearly out of the user partition and into adjacent memory such as other partitions, kernel data or thread stacks. The impact is kernel-memory corruption of attacker-chosen length at an attacker-chosen offset, a plausible privilege-escalation and denial-of-service primitive from an unprivileged user-mode thread. Builds without CONFIG_USERSPACE are affected only as a caller-side robustness defect, since the application itself supplies the buffer. The fix calls the new shared helper adc_sequence_validate_buffer() in drivers/adc/adc_common.c from mcux_lpadc_start_read(). The helper computes active_channels sizeof(uint16_t) (1 + extra_samplings) and returns -ENOMEM before any sampling is started.

Metrics

CVSS 3.1

7.8/10

CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

Weakness Enumeration

CWE-787

Affected Software

Source: CNA advisory (CVE.org). NVD analysis pending.

Vendor	Product	Versions
zephyrproject	zephyr	>= 2.5.0, < 4.4.2

References

Timeline

Published: Sep 28, 2026
Last Modified: Sep 28, 2026
Status: Received

Frequently Asked Questions

What is CVE-2026-18413?

The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to be not large enough". The NXP MCUX LPADC driver did not honour that contract. mcux_lpadc_start_read() in drivers/adc/adc_mcux_lpadc.c performed no buffer-size check at all before assigning data->buffer = sequence->buffer. Each completed conversion then stores one 16-bit sample per enabled channel per sampling round through an unbounded *data->buffer++: in mcux_lpadc_isr() for interrupt-driven builds, and in mcux_lpadc_dma_callback() for DMA-driven builds on releases that have the DMA path. A sequence selecting two channels with a two-byte buffer, for example, has its second sample written past the end of the buffer. On a build with CONFIG_USERSPACE, adc_read() and adc_read_async() are system calls. The handler in drivers/adc/adc_handlers.c copies the sequence in from user memory, verifies only that [buffer, buffer + buffer_size) is writable by the calling thread, and rejects a user-supplied options->callback; it deliberately leaves the size arithmetic to the driver. A user-mode thread that has been granted access to an LPADC device object therefore fully controls channels, buffer, buffer_size and options->extra_samplings, and can request far more samples than its buffer can hold: up to channels * 65536 samples into a two-byte buffer, since the sample pointer is only rewound on a repeat sampling, never on the extra samplings of a sequence. The resulting stores are performed by the driver in kernel mode (in the ADC interrupt handler or the DMA completion callback), where the MPU does not restrict the thread's memory domain, so the write walks linearly out of the user partition and into adjacent memory such as other partitions, kernel data or thread stacks. The impact is kernel-memory corruption of attacker-chosen length at an attacker-chosen offset, a plausible privilege-escalation and denial-of-service primitive from an unprivileged user-mode thread. Builds without CONFIG_USERSPACE are affected only as a caller-side robustness defect, since the application itself supplies the buffer. The fix calls the new shared helper adc_sequence_validate_buffer() in drivers/adc/adc_common.c from mcux_lpadc_start_read(). The helper computes active_channels sizeof(uint16_t) (1 + extra_samplings) and returns -ENOMEM before any sampling is started.

How severe is CVE-2026-18413?

CVE-2026-18413 has a CVSS score of 7.8/10 (HIGH severity).

How do I fix CVE-2026-18413?

Check the vendor references and advisories linked above for patched versions and mitigation guidance. You can also run a Strix scan to test if your systems are affected.

How Strix Helps

Related CVEs from 2026

View all 2026CVEs →